Tough Alloys

Super alloys or high performance alloys are available in a variety of shapes and contain elements in different combinations to obtain a specific result. These alloys are of three types that include iron-based, cobalt-based and nickel-based alloys. The nickel-based and cobalt-based super alloys are available as cast or wrought based alloys based on composition and application.

Super alloys have good oxidation and creep resistance and can be strengthened by precipitation hardening, solid-solution hardening and work hardening methods. They can also function under high mechanical stress and high temperatures and also in places that require high surface stability

Super alloy nNimonic 105™ is a nickel-cobalt-chromium alloy. The following datasheet provides an overview of Nimonic 105™.

The chemical composition of Nimonic 105™ is outlined in the following table.

The following table shows the physical properties of Nimonic 105™.

The mechanical properties of Nimonic 105™ are displayed in the following table.

The thermal properties of Nimonic 105™ are given in the following table.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export packaging

NIMONIC alloys are made up of nickel and chromium. These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. The NIMONIC alloy was first developed during the 1940s in England.

NIMONIC alloys that are available commercially are NIMONIC 75. NIMONIC 90, NIMONIC 100, NIMONIC 80A, 81, 86, NIMONIC 90, NIMONIC PE11 and 16. The NIMONIC alloy 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. This alloy was first introduced for use as turbine blades during the 1940s. It is readily fabricated and welded. This alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Some of the standard forms in which this alloy is available are extruded section, hexagon flats, pipe, plate, strip and wire.

This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 75.

The chemical composition of NIMONIC alloy 75 is given in the following table.

The following table discusses the physical properties of NIMONIC alloy 75.

The mechanical properties of NIMONIC alloy 75 are tabulated below.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

The following table shows the chemical composition of Nimonic Alloy 263™.

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

The mechanical properties of Nimonic Alloy 263™ are provided below.

The thermal properties of Nimonic Alloy 263™ are given below.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

NIMONIC alloys are primarily composed of nickel and chromium. These alloys are known for their high-temperature low-creep and high performance. Additives like aluminium, carbon and titanium are infused into the alloy. The NIMONIC alloy was first developed in 1940 in England. NIMONIC alloys available commercially are NIMONIC 75, NIMONIC 80A, 81, 86, NIMONIC PE11 and 16.

NIMONIC alloy 80A is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. It is manufactured by high-frequency melting and casting in air. It is similar to NIMONIC alloy 75. It has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F).

The NIMONIC alloy 80A is used in the following applications:

• Gas turbine engineering
• Automobile exhaust valves
• Die-casting inserts and cores
• Nuclear boiler tube parts

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Super alloys or high performance alloys are available in a variety of shapes and contain elements in different combinations to obtain a specific result. These alloys are of three types that include iron-based, cobalt-based and nickel-based alloys. The nickel-based and cobalt-based super alloys are available as cast or wrought based alloys based on composition and application.

Super alloys have good oxidation and creep resistance and can be strengthened by precipitation hardening, solid-solution hardening and work hardening methods. They can also function under high mechanical stress and high temperatures and also in places that require high surface stability

Super alloy nNimonic 105™ is a nickel-cobalt-chromium alloy. The following datasheet provides an overview of Nimonic 105™.

Nimonic 105™ is used for high temperature gas turbine components.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

The following table shows the chemical composition of Nimonic 90™.

The physical properties of Nimonic 90™ are outlined in the following table.

The thermal properties of Nimonic 90™ are given in the following table.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export packaging

NIMONIC alloys are made up of nickel and chromium. These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. The NIMONIC alloy was first developed during the 1940s in England.

NIMONIC alloys that are available commercially are NIMONIC 75. NIMONIC 90, NIMONIC 100, NIMONIC 80A, 81, 86, NIMONIC 90, NIMONIC PE11 and 16. The NIMONIC alloy 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. This alloy was first introduced for use as turbine blades during the 1940s. It is readily fabricated and welded. This alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Some of the standard forms in which this alloy is available are extruded section, hexagon flats, pipe, plate, strip and wire.

This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 75.

The chemical composition of NIMONIC alloy 75 is given in the following table.

The following table discusses the physical properties of NIMONIC alloy 75.

The mechanical properties of NIMONIC alloy 75 are tabulated below.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

NIMONIC alloys are primarily composed of nickel and chromium. These alloys are known for their high-temperature low-creep and high performance. Additives like aluminium, carbon and titanium are infused into the alloy. The NIMONIC alloy was first developed in 1940 in England. NIMONIC alloys available commercially are NIMONIC 75, NIMONIC 80A, 81, 86, NIMONIC PE11 and 16.

NIMONIC alloy 80A is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. It is manufactured by high-frequency melting and casting in air. It is similar to NIMONIC alloy 75. It has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F).

This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 80A.

The chemical composition of NIMONIC alloy 80A is given in the following table.

The following table discusses the physical properties of NIMONIC alloy 80A.

The mechanical properties of NIMONIC alloy 80A are tabulated below.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export packaging

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

The following table shows the chemical composition of Nimonic 90™.

The physical properties of Nimonic 90™ are outlined in the following table.

The thermal properties of Nimonic 90™ are given in the following table.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Super alloys or high performance alloys are available in a variety of shapes and contain elements in different combinations to obtain a specific result. These alloys are of three types that include iron-based, cobalt-based and nickel-based alloys. The nickel-based and cobalt-based super alloys are available as cast or wrought based alloys based on composition and application.

Super alloys have good oxidation and creep resistance and can be strengthened by precipitation hardening, solid-solution hardening and work hardening methods. They can also function under high mechanical stress and high temperatures and also in places that require high surface stability

Super alloy nNimonic 105™ is a nickel-cobalt-chromium alloy. The following datasheet provides an overview of Nimonic 105™.

The chemical composition of Nimonic 105™ is outlined in the following table.

The following table shows the physical properties of Nimonic 105™.

The mechanical properties of Nimonic 105™ are displayed in the following table.

The thermal properties of Nimonic 105™ are given in the following table.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

The following table shows the chemical composition of Nimonic Alloy 263™.

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

The mechanical properties of Nimonic Alloy 263™ are provided below.

The thermal properties of Nimonic Alloy 263™ are given below.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Nimonic Alloy 263™ is mainly used in gas turbine hot section components.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

NIMONIC alloys are made up of nickel and chromium. These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. The NIMONIC alloy was first developed during the 1940s in England.

NIMONIC alloys that are available commercially are NIMONIC 75. NIMONIC 90, NIMONIC 100, NIMONIC 80A, 81, 86, NIMONIC 90, NIMONIC PE11 and 16. The NIMONIC alloy 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. This alloy was first introduced for use as turbine blades during the 1940s. It is readily fabricated and welded. This alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Some of the standard forms in which this alloy is available are extruded section, hexagon flats, pipe, plate, strip and wire.

The NIMONIC alloy 75 is used in the following applications:

• Aerospace fasteners
• Gas turbine engineering
• Industrial furnace structural parts
• Heat treatment equipments
• Nuclear engineering.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

Nimonic 90™ is used in high temperature and strength gas turbine components

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: Export Packaging